Power Window Switch Continuity Test (CELICA Convertible Rear Quarter Windows)
Using an ohmmeter, check continuity between specified terminals with power window switch in specified position. See POWER WINDOW SWITCH CONTINUITY TEST (CELICA CONVERTIBLE REAR QUARTER WINDOWS) table. See Fig 1. If continuity does not exist at specified terminals, replace appropriate power window switch.
POWER WINDOW SWITCH CONTINUITY TEST (CELICA CONVERTIBLE REAR QUARTER WINDOWS)
| Application & Position | (1) Terminals No. | |||
|---|---|---|---|---|
| Left Window | ||||
| UP | 1 & 3; 2 & 4 | |||
| OFF | 1, 2 & 3 | |||
| DOWN | 1 & 4; 2 & 3 | |||
| Right Window | ||||
| UP | 1 & 6; 3 & 4 | |||
| OFF | 1, 3 & 6 | |||
| DOWN | 1 & 3; 4 & 6 | |||
|
||||