Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Crankshaft Pulley Bolt | 80 (109) | |||
| Distributor Hold-Down Bolt | 15 (20) | |||
| ECT Sensor | (1) | |||
| EGR Pipe-To-EGR Valve Nut | 43 (58) | |||
| Front (Timing Belt End) Engine Mount Bracket-To-Cylinder Block Bolt | 38 (52) | |||
| Front (Timing Belt End) Engine Mount Insulator-To-Body Bolt | 47 (64) | |||
| Front (Timing Belt End) Engine Mount Insulator-To-Engine Mount Bracket Bolt/Nut | ||||
| Bolt | 27 (37) | |||
| Nut | 38 (52) | |||
| Fuel Inlet Hose-To-Fuel Rail Union Bolt | 25 (34) | |||
| Fuel Outlet Line-To-Fuel Pump Mounting Bracket | 18 (24) | |||
| Fuel Return Line-To-Fuel Pressure Regulator Union Bolt | 14 (19) | |||
| Knock Sensor | 33 (45) | |||
| Oxygen Sensor-To-Exhaust Manifold Retaining Nut | 15 (20) | |||
| Oxygen Sensor-To-Front Catalytic Converter | 33 (45) | |||
| Throttle Body Bolt/Nut | 14 (19) | |||
| Valve Cover Nut | 33 (45) | |||
| Vehicle Speed Sensor Retaining Bolt | 12 (16) | |||
| Wheel Lug Nut | 76 (103) | |||
| INCH Lbs. (N.m) | ||||
| Crankshaft Position Sensor Bolt | 84 (9.5) | |||
| EGR Valve Retaining Nut | 115 (13.0) | |||
| Fuel Pressure Regulator Bolt | 48 (5.4) | |||
| Fuel Pump Mounting Bracket-To-Fuel Tank Bolt | 31 (3.5) | |||
| Fuel Rail-To-Cylinder Head Bolt | 115 (13.0) | |||
| PNP Switch Retaining Bolt | 48 (5.4) | |||
| PNP Switch Retaining Nut | 61 (6.9) | |||
|
||||