Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 1997 >> Celica ST, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 1.8L >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Air Intake Chamber Bolt/Nut (1) 14 (19)
Distributor Hold-Down Bolt 15 (20)
ECT Sensor (2)
Fuel Inlet Hose-To-Fuel Rail Union Bolt 21 (29)
Fuel Outlet Line-To-Fuel Pump Mounting Bracket 18 (24)
Fuel Rail-To-Intake Manifold Bolt 11 (15)
Knock Sensor 33 (45)
Oxygen Sensor-To-Exhaust Pipe 33 (45)
Throttle Body Bolt/Nut 16 (22)
Vehicle Speed Sensor Retaining Bolt 12 (16)
Wheel Lug Nut 76 (103)
INCH Lbs. (N.m) 
Crankshaft Position Sensor Bolt 82 (9.3)
EGR Valve Retaining Nut 115 (13.0)
Fuel Pressure Regulator Bolt 82 (9.3)
Fuel Pump Mounting Bracket-To-Fuel Tank Bolt 31 (3.5)
PNP Switch Retaining Bolt 48 (5.4)
PNP Switch Retaining Nut 61 (6.9)
(1) Tighten bolts/nuts to specification in sequence. See Figure.
(2) Information is not available from manufacturer at time of publication.