Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 1994 >> Tercel Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System >> Testing Anti-Theft Circuits >> Test 11 >> Standard Horn Circuit

Standard Horn Circuit

Turn ignition off and disconnect ATS ECU connector. Ensure battery voltage exists between ground and ATS ECU connector terminal B11 (with power door locks, Green/Yellow wire) or No. 9 (without power door locks, Green/Yellow wire). If battery voltage is not present, ensure continuity exists between standard horn relay terminals No. 1 and No. 2. If standard horn relay is okay, repair open or short in harness or connectors between standard horn relay and ATS ECU as necessary. If battery voltage is present, replace ATS ECU and retest system.

NOTE: Before proceeding to TESTS 12, 13 or 14, verify normal operation of headlights and taillights.
scientia non olet · About Mike's Workshop Manuals