Throttle Position Sensor (TPS) Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1990 Toyota Tercel, 1990 Toyota Pickup, 1990 Toyota Corolla, 1990 Toyota Celica, and 1990 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
THROTTLE POSITION SENSOR ADJUSTMENT
| Clearance Between Lever & Stop Screw |
Ohmmeter Reading At Terminals IDL & E1 (Or E2) |
| Camry & Celica |
| 4A-FE |
| .020" (.51 mm) |
Continuity |
| .032" (.81 mm) |
No Continuity |
| 3S-FE, 3S-GTE & 5S-FE |
| .020" (.51 mm) |
Continuity |
| .028" (.71 mm) |
No Continuity |
| 3S-FE & 5S-FE |
| .020" (.51 mm) |
Continuity |
| .035" (.89 mm) |
No Continuity |
| Corolla |
| 4A-FE |
| .020" (.51 mm) |
Continuity |
| .032" (.81 mm) |
No Continuity |
| 4A-GE |
| .014" (.36 mm) |
Continuity |
| .023" (.58 mm) |
No Continuity |
| Pickup & 4Runner |
| .022" (.56 mm) |
Continuity |
| .034" (.86 mm) |
No Continuity |
| Tercel |
| 3E-E |
| .024" (.61 mm) |
Continuity |
| .032" (.81 mm) |
No Continuity |