Throttle Position Sensor (TPS) Specifications
WARNING: This page is about a different car, the 1990 Toyota Supra, 1990 Toyota Land Cruiser, and 1990 Toyota Cressida. However, it is still accessible from the selected car via links, so may be relevant.
THROTTLE POSITION SENSOR ADJUSTMENT
| Clearance Between Lever & Stop Screw | (1) Ohmmeter Reading At Terminals IDL & E2 | |||
|---|---|---|---|---|
| Cressida | ||||
| .020" (.51 mm) | Continuity | |||
| .035" (.89 mm) | No Continuity | |||
| Land Cruiser | ||||
| .030" (.76 mm) | Less than 2300 Ohms | |||
| .043" (1.09 mm) | Infinity | |||
| Supra Non-Turbo | ||||
| .016" (.41 mm) | Continuity | |||
| .030" (.76 mm) | No Continuity | |||
| Supra Turbo | ||||
| .020" (.51 mm) | Continuity | |||
| .035" (.89 mm) | No Continuity | |||
|
||||