Throttle Position Sensor (TPS) Specifications
WARNING: This page is about a different variant/trim than selected.
THROTTLE POSITION SENSOR ADJUSTMENT
| Clearance Between Lever & Stop Screw | (1) Ohmmeter Reading At Terminals IDL & E2 | |||
|---|---|---|---|---|
| Camry | ||||
| .012" (.30 mm) | Continuity | |||
| .028" (.71 mm) | No Continuity | |||
| Pickup & 4Runner | ||||
| .020" (.51 mm) | Continuity | |||
| .030" (.76 mm) | No Continuity | |||
|
||||