Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 1989 >> Camry Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Controls - Basic Testing - EFI) >> Fuel Pump Control Circuit Test >> EFI Main Relay

EFI Main Relay

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1990 Toyota Tercel, 1990 Toyota Supra, 1990 Toyota Pickup, 1990 Toyota Land Cruiser, and 1990 Toyota Cressida. However, it is still accessible from the selected car via links, so may be relevant.
  1. The EFI fuse supplies constant battery voltage to the EFI main relay. EFI main relay supplies battery voltage to +B pin of engine check connector. If fuel pump will not turn on when +B and FP pins are jumpered, with ignition on, check EFI main relay. See Figure and Figure.
  2. Also, check circuit that turns on EFI main relay. Depending on model, relay may either be turned on directly by ignition switch or by M-REL terminal of ECU. For more information on wiring, see the WIRING DIAGRAMS article in this section.
  3. On all models, EFI main relay provides battery voltage to +B terminal of circuit opening relay.
scientia non olet · About Mike's Workshop Manuals