Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 1980 >> Corolla Base, 2D Hatchback, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Air Injection System >> Testing >> Catalytic Converter Temperature Probe

Catalytic Converter Temperature Probe

Unplug temperature probe connector under driver's seat. With engine warm and idling, measure resistance across probe terminals. Resistance should measure 2, 000 - 200, 000 ohms.

NOTE: Insert ohmmeter probes into rear of connector to avoid damaging contacts.
Fig 1: Vacuum Switching Valve Test Connections
G09324657Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals