Center Console - Remove And Replace: Install

Position the security controller onto the new cup holder decor panel, and then install the screws that attach the controller to the panel.
1.6 N.m (1.2 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- Torx T20 socket
Courtesy of TESLA, INC.
Connect the electrical connector to the security body controller module.

Courtesy of TESLA, INC.
Attach the clips (x6) that attach the cup holder decor panel to the center console assembly.

Courtesy of TESLA, INC.
Install the RH center console bright strip to the center console assembly.

Courtesy of TESLA, INC.
Install the screws (x4) that attach the RH center console bright strip to the center console assembly.
1.6 N.m (1.2 ft-lbs)

Tip: Use of the following tool(s) is recommended:
- Torx T20 socket
Courtesy of TESLA, INC.
Install the RH decor trim onto the center console assembly

Courtesy of TESLA, INC.
Repeat step 4 through step 6 for the LH side of the center console.
Install the center console assembly. See CENTER CONSOLE (REMOVE AND INSTALL) .