Subframe Assembly - Front (1st Generation) (Dual Motor) - Remove And Install: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
Last modified: 05/10/2023 09:06:21
This procedure is for Dual Motor vehicles built through April 10, 2016.
For other generation front subframe assemblies, see also:
- SUBFRAME ASSEMBLY - FRONT (1ST GENERATION) (RWD) (REMOVE AND INSTALL)
- SUBFRAME ASSEMBLY - FRONT (2ND GENERATION) (RWD) (REMOVE AND INSTALL)
- SUBFRAME ASSEMBLY - FRONT (2ND GENERATION) (DUAL MOTOR) (REMOVE AND INSTALL)
- SUBFRAME ASSEMBLY - FRONT (3RD GENERATION) (REMOVE AND INSTALL)
Special tools required for this procedure:
- 1021241-00-B - Subframe Fixture, Rear, MDLS
- 1021242-00-C - Subframe Fixture, Front Jig - MDLS
or
- 1063646-00-A - Model S/X Legacy Subframe Lift Fixture
WARNING:
If the vehicle has air suspension, activate "Jack" mode on the touchscreen before raising and supporting the vehicle.
Revision History:
- 2023-10-05: Added alternative special tool.