Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Doors, Windows And Latches -- Model S) >> Closure Assist Mechanisms And Hinges >> Module - Liftgate Control - Remove And Replace >> Removal

Module - Liftgate Control - Remove And Replace: Removal

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH side trunk trim Trim - Rear Trunk - Side - RH (Remove And Replace) .
  2. Disconnect the harness connectors (x2) from the electric park brake (EPB) module.
    G14975041Courtesy of TESLA, INC.
  3. Disconnect the harness connections (x2) from the liftgate control module.
    G14975042Courtesy of TESLA, INC.
  4. Remove the nuts (x4) that secure the bracket to the wheelhouse studs (torque 3 N.m/2.21 ft-lbs.).
    G14975043Courtesy of TESLA, INC.
  5. Remove the bracket and modules assembly.
  6. Remove the nuts and bolts (x3) that secure the modules to the bracket (torque 2 N.m/1.47 ft-lbs.).
    CAUTION: Replace all patchbolt(s).
    G14975044Courtesy of TESLA, INC.
  7. Remove the liftgate control module from the bracket.
    G14975045Courtesy of TESLA, INC.
scientia non olet · About Mike's Workshop Manuals