Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Body -- Model S) >> Windshield, Liftgate Glass, And Body Glass >> Sensor - HVAC - Light/Temperature/Humidity - Remove And Replace >> Notes

Sensor - HVAC - Light/Temperature/Humidity - Remove And Replace: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.

Last modified: 17/02/2021 13:48:24

NOTE: This procedure applies to vehicles equipped with 2nd generation Autopilot hardware only. For vehicles without Autopilot hardware or with 1st generation Autopilot hardware, refer to SENSOR - LIGHT/RAIN (VEHICLES WITHOUT AUTOPILOT AND WITH 1ST GENERATION AUTOPILOT) (REMOVE AND REPLACE)  or refer to SENSOR - LIGHT/RAIN (VEHICLES WITHOUT AUTOPILOT AND WITH 1ST GENERATION AUTOPILOT) (REMOVE AND REPLACE)  respectively.