Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Maintenance, Inspection And Service -- Model S) >> Service Modes >> Toolbox 3 - Connect and Disconnect >> Complete Disconnect

Complete Disconnect

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
  1. Allow any running Toolbox 3 routines to complete.
  2. In Toolbox 3, click the green circle in the upper right corner to open the connection window.
    G00624031Courtesy of TESLA, INC.
  3. Click Disconnect  , and then click the grey circle to close the connection window.
  4. Disconnect the vehicle interface cable from the vehicle interface connector and from the laptop.
    G00623550Courtesy of TESLA, INC.
  5. Install the cubby to under the Media Control Unit.
    G00623547Courtesy of TESLA, INC.
  6. Return to the procedure that required disconnection of the laptop with Toolbox 3 from the vehicle.
scientia non olet · About Mike's Workshop Manuals