Drive Cycle Calibration - Forward Facing Camera: Calibration
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
- Connect a laptop with Toolbox 2.0 or later to the vehicle.
- On the touchscreen, touch Controls (vehicle icon), and then touch the Software tab to display the vehicle firmware version.
- Verify that the vehicle firmware version is 1.67.80 or later, and update if necessary.NOTE: Update the vehicle firmware. See Firmware Update .
- In Toolbox, select Panels > Driver Assist > Camera Calibration .
- Click the Start/Play button.
- Follow the onscreen instructions to calibrate the forward facing camera.WARNING: Perform the calibration procedure in a suitable location and comply with all local traffic safety laws.NOTE: Have an assistant monitor Toolbox during the drive cycle.