Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Instrument Panel -- Model Y) >> Instrument Panel >> IP Carrier - Remove And Install >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2024 Tesla Model Y, 2023 Tesla Model Y, 2022 Tesla Model Y, 2021 Tesla Model Y, and 2020 Tesla Model Y. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS - IP CARRIER (REMOVE AND INSTALL)

Description Torque Value Recommended Tools Reuse/Replace Notes
Front passenger airbag to cross car beam bolt 8 N.m (5.9 lbs-ft) 
  • External Torx E10 or Torx T30 socket
  • 4 in extension
  • 1/4 in std ratchet
  • 1/4 in torque wrench (installation only)
 Replace  
IP carrier to crosscar beam screws 2.3 N.m (1.7 lbs-ft) 
  • Torx T20 socket
  • 4 in extension
  • 1/4 in std ratchet
  • 1/4 in torque wrench (installation only)
 Reuse  
scientia non olet · About Mike's Workshop Manuals