Adjust Front Toe
WARNING: This page is about a different car, the 2024 Tesla Model Y, 2023 Tesla Model Y, 2022 Tesla Model Y, 2021 Tesla Model Y, and 2020 Tesla Model Y. However, it is still accessible from the selected car via links, so may be relevant.
- If the front toe is within specification and does not require adjustment, complete the alignment. See COMPLETE THE ALIGNMENT .
- Loosen the jam nut on the LH inner tie rod.
- Rotate the LH inner tie rod to adjust the front LH toe to specifications. See WHEEL ALIGNMENT
.
- To add positive toe in, move the tie rod end in toward the centerline.
- To add negative toe out, move the tie rod end out from the centerline.
- When the front LH toe is correct, tighten the jam nut on the LH inner tie rod.
80 N.m (59.0 ft-lbs)
- Perform step 2 through step 4 for the RH side of the vehicle if necessary.
- Complete the alignment. See COMPLETE THE ALIGNMENT .