Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Tesla >> 2014 >> Model S Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Wheel And Tires -- Model 3) >> Tire Pressure Monitoring System (TPMS) >> Sensor - TPMS - Remove and Replace >> Install

Sensor - TPMS - Remove and Replace: Install

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use an IPA wipe to thoroughly clean the inside and outside of the TPMS sensor mounting hole.
  2. Install the TPMS sensor so that it fits closely to the wheel.
    G14749974Courtesy of TESLA, INC.
  3. Install the nut that secures the TPMS sensor to the wheel.

    8 N.m (5.9 lbs-ft) 

  4. Release the upper bead roller, and allow the bead to seat against the wheel.
  5. Inflate the tire to seat the bead.
  6. Install the valve stem core, and then remove the wheel from the tire changer.
  7. Rebalance the wheel. See TIRE - FRONT - LH (BALANCE) .
  8. Reinstall the wheel. See WHEEL (REMOVE AND INSTALL) .
  9. Program the TPMS sensor ID. See TPMS (SENSOR ID TOOL LEARN) .
scientia non olet · About Mike's Workshop Manuals