Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Tesla >> 2012 >> Model S >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Body -- Model Y) >> Windshield And Body Glass >> Windshield (Non-Structural Pack) Remove and Replace >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2024 Tesla Model Y, 2023 Tesla Model Y, 2022 Tesla Model Y, 2021 Tesla Model Y, and 2020 Tesla Model Y. However, it is still accessible from the selected car via links, so may be relevant.
Torque Specifications: Windshield (Non-Structural Pack) (Remove and Replace)

Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the GPS antenna to the bracket 1 Nm (.7 lbs-ft) • Torx T10 bit
• Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only)		 Reuse
Screws that attach the triple camera to the windshield bracket 1 Nm (.7 lbs-ft) • Torx T10 blade attachment
• Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only)
• Wiha torque setter
Screws (x2) that attach the temperature and humidity sensor to the windshield bracket 0.12 Nm (1 lbs-in) Tool for removal:
• PH00 Philips Screwdrive
Tools for installation:
• Wiha Torque Vario-S 0.10Nm - 0.6Nm
• Wiha 1/4in Adapter
• PH00 blade attachment		 Reuse
scientia non olet · About Mike's Workshop Manuals