Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Start System >> Repair Instructions >> Antenna Inspection >> Using SUZUKI Scan Tool

Using SUZUKI Scan Tool

  1. Connect SUZUKI scan tool to DLC with ignition mode of keyless push start system in "OFF".
  2. Push engine switch to change ignition mode to "ON", and select "Active Test" mode on SUZUKI scan tool.
  3. Check that each antenna operates.

    If check result is not as specified, check applicable circuit for open or short.

scientia non olet · About Mike's Workshop Manuals