Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 2012 >> SX4 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Electrical Devices >> Repair Instructions >> Electric Throttle Body Assembly On-Vehicle Inspection >> Throttle Actuator (Motor) Check

Throttle Actuator (Motor) Check

  1. Turn OFF ignition switch.
  2. Disconnect connector from electric throttle body assembly.
  3. Measure resistance between "M1" terminal (1) and "M2" terminal (2) of electric throttle body assembly.

    If measured resistance is out of specified value, replace electric throttle body assembly.

    Throttle actuator (motor) resistance 

    0.3 - 100 Ω at 20 °C, 68 °F 

    Fig 1: Checking Throttle Actuator (Motor) Resistance
    G06868185Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About Mike's Workshop Manuals