Fuel Tank: Removal and Installation: Installation

Installation is in the reverse order of removal.

• For installation, use a new fuel level sensor, fuel filter, and fuel pump assembly O-ring.
  CAUTION: Do not reuse O-ring.
• Connect the quick connector as follows:
  1. Check the connection for any damage or foreign materials.
  2. Align the connector with the pipe, then insert the connector straight into the pipe until a click is heard.
  3. After connecting the quick connector, make sure that the connection is secure by checking as follows:
     Fig 1: Checking Quick Connector Connection

     Courtesy of SUZUKI OF AMERICA CORP.
  4. Pull the tube and the connector to make sure they are securely connected.
  5. Visually inspect the connector to make sure the two retainer tabs are securely connected.