Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Diagnostic Information and Procedures >> U1000 CAN COMM Circuit >> DTC Confirmation Procedure >> Diagnosis Procedure

Diagnosis Procedure

DIAGNOSIS PROCEDURE

Step Action YES NO
1  PERFORM DTC CHECK 
  1. Turn ignition switch ON and wait for 2 seconds or more.
  2. Perform "DTC check" of IPDM E/R.

Is "CAN COMM CIRCUIT" displayed? 		 Refer to [LAN SYSTEM: BASIC INSPECTION ] Refer to [SERVICE INFORMATION FOR ELECTRICAL INCIDENT: INTERMITTENT INCIDENT ]
scientia non olet · About Mike's Workshop Manuals