Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 2011 >> Grand Vitara Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program >> Diagnostic Information and Procedures >> DTC C1094: Torque Request Reject Status >> DTC Troubleshooting

DTC Troubleshooting

DIAGNOSIS PROCEDURE

Step Action YES NO
1  Was "Electronic Stability Program Check" performed?  Go to Step 2. Go to ELECTRONIC STABILITY PROGRAM CHECK .
2  DTC check for ESP® 
  1. Connect scan tool to DLC with ignition switch turned OFF.
  2. Turn ignition switch ON and check DTC for ESP®.

Is there any DTC(s) other than C1094? 		 Go to applicable DTC diag. flow. Go to step 3.
3  DTC check for ECU 
Is there any DTC(s)? 		 Go to applicable DTC diag. flow. Substitute a known-good ECM and recheck. If this DTC is detected again, substitute a known-good ESP® hydraulic unit/control module assembly.
scientia non olet · About Mike's Workshop Manuals