Special Repair Requirement
DIAGNOSIS PROCEDURE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | SAVING VEHICLE SPECIFICATION Perform "READ CONFIGURATION" with SDT to save or print current vehicle specification. |
GO TO 2 | |
| 2 | Replace BCM Replace BCM. Refer to [BCM (BODY CONTROL MODULE): REMOVAL AND INSTALLATION ]. |
GO TO 3 | |
| 3 | WRITING VEHICLE SPECIFICATION Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" with SDT to write vehicle specification. Refer to [BODY CONTROL SYSTEM: CONFIGURATION ]. |
GO TO 4 | |
| 4 | INITIALIZE BCM (IMMOBILIZER SYSTEM) Perform BCM initialization. Refer to [ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT ]. |
Work End. |