Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Diagnostic Information and Procedures >> DTC B1516 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, engine OFF, turn off the headlamps and all accessories. Connect a scan tool. Do not connect a battery charger.
  2. Observe the Battery Current parameter with a scan tool. Verify that the scan tool Battery Current parameter is between -5 and -10 amps.
scientia non olet · About Mike's Workshop Manuals