Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 2008 >> SX4 LE, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P0481: Fan 2 Control Circuit (Non-EVAP-Leak-Check Model) >> DTC Confirmation Procedure >> Notes

DTC Confirmation Procedure: Notes

  1. With ignition switch turned OFF, connect scan tool.
  2. Turn ON ignition switch and clear DTC by using scan tool.
  3. Start engine and run it at idle speed.
  4. Select blower selector at 1st position or more.
  5. Turn on A/C switch.
  6. Wait until A/C condenser fan stops.
  7. Check DTC and pending DTC.
scientia non olet · About Mike's Workshop Manuals