Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Repair Instructions >> Transmission Mount Replacement - Left Side >> Installation Procedure

Installation Procedure

Fig 1: Identifying Transaxle Mount To Bracket Nuts & Mount Bracket (2 Of 2)
G04845940Courtesy of SUZUKI OF AMERICA CORP.
  1. Position the transaxle mount in place between the frame and mount bracket (1).
  2. Lower the transaxle onto the mount (3).
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the transaxle mount to bracket nuts (2).

    Tightening torque 

    Tighten the nuts to 37 N.m (27 lb ft)  .

  4. Remove the transaxle mount to frame nuts (4).

    Tightening torque 

    Tighten the nuts to 37 N.m (27 lb ft)  .

  5. Remove the transmission stand.
  6. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals