Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Heat Shield Replacement - Dash Panel >> Installation Procedure

Installation Procedure

Fig 1: Installing Dash Panel Exhaust Heat Shield To Underbody
G04843574Courtesy of SUZUKI OF AMERICA CORP.
  1. Position the dash panel heat shield to the underbody, installing the shield over the stud.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the dash panel heat shield nut.

    Tightening torque 

    Tighten the nut to 10 N.m (89 lb in). 

  3. Install NEW rivets.
  4. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals