Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Diagnostic Information and Procedures >> DTC C0900 >> Circuit / System Verification

Circuit / System Verification

  1. Verify DTC C0900 is set as current.
  2. Start the engine, record the voltage at the battery terminals. Observe the scan tool EBCM battery voltage signal parameter. Voltages should not differ by more than 1 volt.
    • If greater than 1 volt, replace the EBCM.
scientia non olet · About Mike's Workshop Manuals