Cruise Control Inhibited

The engine control module (ECM) inhibits the cruise control operation when any of the following conditions exist:

• The ECM has not detected a brake pedal activation from the body control module (BCM).
• A cruise control related DTC has been set.
• The anti-lock brake system/traction control system is active for more than 2 seconds.
• The engine RPM is too low.
• The engine RPM is too high.
• The system voltage is not between 9-16 volts.
• The vehicle speed is less than 40 km/h (25 mph).
• The vehicle speed is too high.
• The vehicle is in PARK, REVERSE, NEUTRAL, or 1st gear.