Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 2006 >> Verona Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Security And Locks) >> Diagnostic Information and Procedures >> Keyless Entry System Check

Keyless Entry System Check

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
TEST PROCEDURE - KEYLESS ENTRY SYSTEM

Step Action YES NO
1  System check 
NOTE: When performing the keyless entry operation check, make sure to have any of the door once opened/closed after the ignition key has been removed from the ignition key cylinder.

Is keyless entry system in good condition? 		 System is in good condition. Go to Step 2.
2  DTC check of BCM 
  1. Check DTC referring to DTC CHECK .

Are there any malfunction DTC(s)? 		 Inspect and repair referring to applicable DTC inspection flow. Go to Step 3.
3  Trouble symptom check 
  1. Inspect and repair referring to KEYLESS ENTRY SYSTEM SYMPTOM DIAGNOSIS .

Are check and repair completed? 		 Go to Step 4. Check and repair malfunction parts. Then go to Step 4.
4  Final confirmation check 
  1. Clear DTC if any.
  2. Perform system check.

Is there any problem symptom malfunction DTC or abnormal condition? 		 Go to Step 2. End.
scientia non olet · About Mike's Workshop Manuals