Body Electrical Control System
- Precautions
- General Description
- Schematic And Routing Diagram
- Component Location
- Diagnostic Information And Procedures
- BCM Self-Diagnosis Function
- Body Electrical Control System Check
- Scan Tool Data
- DTC Table
- DTC Check
- DTC Clearance
- BCM Power Circuit And Ground Circuit Check
- DTC B1133 (DTC No. 1133): Battery Voltage Too High
- DTC B1141/DTC B1142 (No. 1141/No. 1142): Outside Air Temperature (Ambient Temp.) Sensor Circuit Malfunction
- DTC B1150 (No. 1150): Air Bag Communication Circuit Malfunction
- DTC B1157 (No. 1157): Air Bag Deployment Signal Input
- DTC B1170 (No. 1170): EEPROM Access Error
- DTC U1073 (No. 1073): Control Module Communication Bus Off
- DTC U1100 (No. 1100): Lost Communication With ECM
- DTC U1101 (No. 1101): Lost Communication With TCM
- DTC U1144 (No. 1144): Lost Communication With Keyless Start Control Module
- Inspection Of BCM And Its Circuits
- Notes
- Voltage Check
- Notes
- BCM connector "G30"
- BCM connector "G31"
- BCM connector "G32"
- Reference waveform No. 1
- Reference waveform No. 2
- Reference waveform No. 3
- Reference waveform No. 4
- Reference waveform No. 5
- Reference waveform No. 6
- Reference waveform No. 7
- Reference waveform No. 8
- Reference waveform No. 9
- Reference waveform No. 10
- Reference waveform No. 11
- Repair Instructions
- Special Tools And Equipment