Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 2004 >> Vitara RWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Repair Instructions >> Cruise Main Switch Inspection

Cruise Main Switch Inspection

  1. Disconnect battery negative cable (-) at battery.
  2. Disconnect connector from cruise main switch.
  3. Remove cruise main switch from instrument panel.
  4. Check for resistance between "IG" and "LOAD" terminals. If check result is not satisfactory, replace.

    Cruise main switch specification 

    Switch button released: Infinity 

    Switch button pressed: About 3.9 kohm 

  5. Install cruise main switch to instrument panel and connect connector securely.
Fig 1: Checking Resistance Between IG And LOAD Terminals
G00797367Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About Mike's Workshop Manuals