Conditions for Clearing the MIL/DTC

The MIL will turn OFF when the malfunction has not occurred after three-ignition cycle.
A history DTC will clear after 40 consecutive warm up cycles without a fault.
Using a scan tool can clear history DTCs.

Fig 1: DTC P0606: Transaxle Control Module Processor Fault Diagnostic Chart (1 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: DTC P0606: Transaxle Control Module Processor Fault Diagnostic Chart (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.