Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 1995 >> Swift Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Power Steering Pressure (PSP) Switch

Power Steering Pressure (PSP) Switch

  1. Disconnect wire connector from PSP switch on power steering pump. Start engine. Connect ohmmeter between ground and switch terminal. With steering wheel in straight-ahead position, there should be no continuity.
  2. Turn steering wheel. As steering pressure increases, continuity should exist. If there is no continuity when steering wheel is turned or if there is continuity with steering wheel in straight-ahead position, replace PSP switch.
scientia non olet · About Mike's Workshop Manuals