Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Suzuki >> 1986 >> Samurai Base >> Repair and Diagnosis >> Engine Performance >> Ignition System - NIPPONDENSO Electronic >> Testing >> Pick-Up Coil (Signal Generator) Resistance Test

Pick-Up Coil (Signal Generator) Resistance Test

  1. Turn ignition off. Remove distributor cap and cover. Disconnect Red and White wires from ignitor.
  2. Measure resistance across signal generator Red and White wires. Resistance should be 130-190 ohms.
scientia non olet · About Mike's Workshop Manuals