Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2024 >> Impreza Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Engine Starting System & Charging System >> Auto Start Stop DC/DC Converter >> Removal >> Auto Start Stop DC/DC CONVERTER 2

Auto Start Stop DC/DC CONVERTER 2

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the Auto Start Stop DC/DC converter 2.
    1. Remove the connector (A) and connector (B).
    2. Remove the clip securing the vehicle harness to the bracket.
      G16761935Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the Auto Start Stop DC/DC converter 1 and Auto Start Stop DC/DC converter 2 from the vehicle.
      G16761936Courtesy of SUBARU OF AMERICA, INC.
    4. Remove the Auto Start Stop DC/DC converter 2 from the bracket.
      G16761940Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals