Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2024 >> Forester Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Reverse Automatic Braking System >> Reverse Automatic Braking Control Module >> Installation

Reverse Automatic Braking Control Module: Installation

  1. Install the sonar Control Module assembly.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. When the sonar Control Module assembly has been replaced, read the [Reverse Automatic Braking] customizing information. Ref. to COMMON (DIAGNOSTICS)>CUSTOMIZE>OPERATION > SAVE SETTINGS / READ SETTINGS .
scientia non olet · About Mike's Workshop Manuals