360-degree Surround View Monitor (Multi View Monitor)
- Press the VIEW switch when the select lever is in other than "P range" or "R range", and check if the top view image is displayed on the center information display (CID).
- Press the VIEW switch again, and check if the top view and side view images are displayed.
- Press the VIEW switch again, and check if the top view and front view images are displayed.NOTE: Display is stopped in the following conditions.
- Electronic parking brake operation
- The select lever is in "P range" or "R range"
- Vehicle speed is 20 km/h (13 MPH) or more
- Screen switching by operating the center information display (CID)
- Shift the select lever to "R range", and check if the top view and rear view images are displayed on the center information display (CID).NOTE: The rear view image and the Reverse Automatic Braking (RAB) image are displayed at the same time.
- Press the VIEW switch, and check if the rear view image is displayed.NOTE:
- Display is stopped when the select lever is shifted to "P range".
- The rear view image and the Reverse Automatic Braking (RAB) image are displayed at the same time.
- Shift the select lever to "P range" and press the VIEW switch, and then check if the 3D view image is displayed on the center information display (CID).
(A) Vehicle icon (B) Vehicle angle icon - Press the "Vehicle angle icon" displayed on the center information display (CID) while the 3D view image is displayed, and check that the viewpoint of the 3D view image is switched.