| Cylinder block warpage (Mating surface with cylinder head) |
mm (in) |
Limit |
0.025 (0.0010) |
| Grinding limit of cylinder block |
mm (in) |
204.95 (8.0689) or less |
| Height of cylinder block |
mm (in) |
Standard |
205.0 (8.0709) |
| Inner diameter of cylinder liner |
mm (in) |
Cylinder bore size mark A |
Standard |
94.005 - 94.015 (3.7010 - 3.7014) |
| Cylinder bore size mark B |
Standard |
93.995 - 94.005 (3.7006 - 3.7010) |
| Cylindricality of cylinder liner |
mm (in) |
Limit |
0.030 (0.0012) |
| Out-of-roundness of cylinder liner |
mm (in) |
Limit |
0.030 (0.0012) |
| Piston grade point |
mm (in) |
37.0 (1.4567) |
| Piston outer diameter |
mm (in) |
Standard Size |
Grade A |
Standard |
93.985 - 93.995 (3.7002 - 3.7006) |
| Grade B |
Standard |
93.975 - 93.985 (3.6998 - 3.7002) |
| 0.25 (0.0098) oversize |
Standard |
94.225 - 94.245 (3.7096 - 3.7104) |
| 0.50 (0.0197) oversize |
Standard |
94.475 - 94.495 (3.7195 - 3.7203) |
| Clearance between cylinder liner and piston |
mm (in) |
Standard |
0.010 - 0.030 (0.0004 - 0.0012) |
| Inner diameter of cylinder liner boring limit (diameter) |
mm (in) |
94.505 (3.7207) or less |