Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2023 >> WRX Base, Automatic CVT Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Front Arm >> Disassembly >> Pillow Ball Bushing

Pillow Ball Bushing

  1. Remove the pillow ball bushing using ST1 and ST2.

    Preparation tool: 

    ST1: INSTALLER & REMOVER (20099AE020)

    ST2: HOUSING STAND (28099PA010)

    NOTE: Place a metal plate on the ST1 to use the press.
G16538554Courtesy of SUBARU OF AMERICA, INC.
(a) Press
(b) Arm ASSY front
(c) Pillow ball bushing
(d) Plate
scientia non olet · About Mike's Workshop Manuals