Lock/Unlock And Open/Close Operation Of Doors
- Using the key, lock and unlock the door several times to check for normal operation. Open and close the door several times for smooth movement.CAUTION: The mechanical key is a single groove type. Insert the mechanical key with the groove side facing the front side of the vehicle.NOTE: For model with keyless access with push button start, check by using the mechanical key.
- Completely close the door, and then check the smooth movement with operating door lock knob from lock to unlock several times. Set the door lock knob (A) to lock position. Pull the inner remote (B) to ensure that driver's and passenger's doors will open and rear doors will not open.
(A) Door lock knob (B) Inner remote - Close all the doors, and then press the lock on power door lock switch at driver's side. Check that all doors (including the rear gate) lock.
- Press the driver's power door lock switch to the unlock side. Check that all doors (including the rear gate) unlock.
- Check that the passenger's power door lock switch locks and unlocks normally in the same manner.
(A) Lock (B) Unlock - With ACC ON or ignition switch ON, open the driver's door. Press the lock side on power door lock switch. Check that the door is not locked.