Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Front Suspension System And Wheel Alignment) >> Stabilizer >> Removal >> Stabilizer Bushing

Stabilizer Bushing

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>Front Under Cover>REMOVAL .
  2. Remove the center exhaust pipe (rear). Ref. to EXHAUST (H4DOTC)>Center Exhaust Pipe>REMOVAL>CENTER EXHAUST PIPE (REAR) .
  3. Remove the clamp stabilizer on the left and right sides.
    G13199300Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the rubber bushing stabilizer front.
scientia non olet · About Mike's Workshop Manuals