Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Anti-Theft System - Security And Locks) >> Rear Gate Opener Button >> Installation

Rear Gate Opener Button: Installation

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Make sure that the harness grommet of the garnish assembly - rear gate is securely installed. If not properly installed, this may cause leaks  .
  1. Install the switch opener rear gate.
  2. Install the garnish assembly rear gate. Ref. to EXTERIOR/INTERIOR TRIM>Rear Gate Garnish>INSTALLATION .
  3. Install the trim panel assembly rear gate.
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About Mike's Workshop Manuals