Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Anti-Theft System - Security And Locks) >> Rear Gate Opener Button >> Inspection

Rear Gate Opener Button: Inspection

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester

    • Keyless entry model
    G10277255Courtesy of SUBARU OF AMERICA, INC.
    • Model with keyless access with push button start
    G11246316Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    1 - 2 When the switch is not pressed 1 MΩ or more
    When the switch is pressed Less than 5 Ω
  2. If the inspection result is not within the standard, replace the switch opener rear gate.
scientia non olet · About Mike's Workshop Manuals