Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Power Rear Gate System) >> Power Rear Gate Driver's Switch >> Removal

Power Rear Gate Driver's Switch: Removal

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
  3. Remove the power rear gate driver's switch.
    1. Release the claws, and then remove the power rear gate driver's switch (a).
    G12401637Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals