Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Vehicle Dynamics Control (VDC) System) >> VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) >> Maintenance Mode >> VDCCM Parameter Reading

VDCCM Parameter Reading

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the Subaru Select Monitor, select [Reading of parameter: ECM to SSM] on the [Work Support] display. Ref. to BRAKE CONTROL (DIAGNOSTICS)>WORK SUPPORT .
  2. Save and close the file.
scientia non olet · About Mike's Workshop Manuals