Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Lubrication System (2.5L)) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Remove the generator from the bracket. Refer to STARTING/CHARGING SYSTEMS(STI)>GENERATOR>REMOVAL .
  3. Disconnect the terminal from oil pressure switch.
    G04997911Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the oil pressure switch.
G04997912Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals