Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2021 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission Control System >> AT Shift Lock Solenoid and "P" Range Switch >> Installation >> Solenoid Unit

Solenoid Unit

  1. Clean all the parts before assembly.
  2. Insert the solenoid unit terminals to the harness connector.
    G13935613Courtesy of SUBARU OF AMERICA, INC.
  3. Install the solenoid unit.
  4. Install the harness connector to the plate COMPL.
  5. Install the spacer plate and the gasket. Ref. to CONTROL SYSTEMS>SELECT LEVER>ASSEMBLY .
  6. Install the select lever. Ref. to CONTROL SYSTEMS>SELECT LEVER>INSTALLATION .
scientia non olet · About Mike's Workshop Manuals